Checking The Gas Type - Fisher & Paykel GC912 Installation Instructions Manual

Checking the gas type

Burners
RH Rear
LH Rear
RH Front Simmer
LH Front
Centre (GC912)
Centre (GC913)
Clamping down the cooktop
1
Place the cooktop into the cutout and tighten it with the supplied clamps. These will cope
with the countertop thicknesses
Do not over tighten.
10
NG Orifice NG
(mm) BTU (MJ/h) @
0.15 psi (4"H
1.3 mm 8,000 (8.4 MJ/h)
1.1 mm 5,800 (6.1 MJ/h)
0.85 mm 3,000 (3.2 MJ/h)
1.3 mm 8,000 (8.4 MJ/h)
1.75 mm 14,000 (14.8 MJ/h)
2.15 mm 20,000 (21.1 MJ/h)
3
/ "- 2" when used in the two orientations shown.
4
LP Orifice
(mm)
0)
2
0.8 mm
0.7 mm
0.55 mm
0.8 mm
1.05 mm
1.22 mm
3
/ " - 2"
4
(19 mm - 50 mm)
LP
BTU (MJ/h) @
0.41psi (11"H 0)
2
8,200 (8.7 MJ/h)
5,700 (6.0 MJ/h)
3,500 (3.7 MJ/h)
8,200 (8.7 MJ/h)
13,000 (13.7 MJ/h)
19,000 (20 MJ/h)