Converting To A Different Gas Type - Fisher & Paykel CG365C Installation Instructions And User Manual

IIII n sta III!at'iomf inst uct'iomf s
Converting to a different gas type
Gas regulator
For use with a gas pressure regulator as shown below. The regulator supplied can be set for
either LP Gas or Natural Gas.
Pressure f-_]_
...........
/ _,
R k;Y" / &
Gas How ouse supply
Converting the regulator between NG & LP
1 Unscrew the cap from the reguhtor.
2 Check the odentation of the phstic conversior, plug, and if necessary, unscrew, turn over and
screw back in ,:wide section away from cap for LP and against cap for NG --see diagram below for
appropriate orientation).
jj ;'_ Replace regulator cap.
4 Test gas pressure (test point provision on side of regulator). When converting the regulator for S
different settings, the function of the regulator must be checked at a pressure at least l"WC
(0.036 psi)above the specified manifold pressure.