Safety And Warnings - Fisher & Paykel GC912 Installation Instructions Manual

Safety & warnings
WARNINGS!
This appliance shall be installed in
accordance with the installation
requirements of the local gas authority
or the appropriate installation code
or in the absence of local codes with
the latest National Fuel Gas Code ANSI
Z223.1 or CAN B149.1,2(Canada). Local
building and electrical codes must be
adhered to.
2
WARNING
Electrical Shock Hazard
Disconnect power
before servicing the
product.
Failure to do so could
result in death or
electrical shock.
WARNING
Cut Hazard
Beware of sharp edges.
Use polystyrene end
caps when carrying
the product.
Failure to use caution
could result in injury
or cuts.
Flexible appliance connectors shall
meet the requirements of ANSI Z21.24
and State Boards. They shall not
exceed 36 inches in length.
CAUTION!
In order to avoid hazard these products
must be installed according to these
instructions.
This product should not be sealed into the
countertop with silicone or glue. This will
make any future servicing difficult. Fisher &
Paykel will not be liable for costs associated
with releasing such products, nor for
damage incurred as a result.
IMPORTANT!
This product must be installed by an
authorized person (Warning this product
must be installed by a licensed plumber or
gas fitter when within the Commonwealth
of Massachusetts).
Please leave these instructions with the
appliance. Tell the customer to keep them
for future reference.
This product is supplied with an additional
label containing the model and serial
numbers. It may be affixed to the underside
of the product, the inside of a cupboard or
to the User Guide.