Engine Maintenance; Servicing The Air Cleaner - Toro TITAN ZX4800 Operator's Manual

Figure 32
1. Front caster tire
4. Connect a grease gun to each fitting
and Figure 31). Pump grease into the fittings
until grease begins to ooze out of the bearings.
5. Wipe up any excess grease.

Engine Maintenance

WARNING
Contact with hot surfaces may cause personal
injury.
Keep hands, feet, face, clothing and other
body parts away the muffler and other hot
surfaces.

Servicing the Air Cleaner

Service Interval: Before each use or daily—Check
g009949
Every 25 hours—Service or replace the
air-cleaner foam element (more often under
extremely dusty, dirty conditions).
(Figure 32 Every 100 hours—Replace the air-cleaner
paper element (more often under extremely
dusty, dirty conditions).
This engine is equipped with a replaceable, high
density paper and foam air-cleaner element. Check
the air cleaner daily or before starting the engine.
Check for a buildup of dirt and debris around the
air-cleaner system. Keep this area clean. Also, check
for loose or damaged components. Replace all bent
or damaged air-cleaner components.
Note:
Operating the engine with loose or damaged
air-cleaner components could allow unfiltered air into
the engine, causing premature wear and failure.
Note:
Service the air cleaner more often under
extremely dusty, dirty conditions.
Removing the Elements
1. Rotate the latches outward.
2. Remove the cover to access the air-cleaner
elements
32
the air cleaner for dirty, loose or
damaged parts.
(Figure 33).