Driving Forward Or Backward - Toro TITAN ZX4800 Operator's Manual

Driving Forward or
Backward
The throttle control regulates the engine speed as
measured in rpm (revolutions per minute). Place
the throttle control in the fast position for best
performance. Always operate in the full throttle
position when mowing.
CAUTION
Machine can spin very rapidly. Operator may
lose control of machine and cause personal
injury or damage to machine.
• Use caution when making turns.
• Slow the machine down before making
sharp turns.
Using the Motion Control Levers
Figure 19
1. Motion control
lever-neutral lock position
2. Center, unlocked position
3. Forward
Driving Forward
Note:
The engine will kill if the traction control levers
are moved with the parking brake engaged.
g004532
4. Backward
5. Front of machine
1. Release the parking brake; refer to
the Parking Brake (page
2. Move the levers to the center, unlocked position.
3. To go forward, slowly push the motion control
levers forward
Driving Backward
1. Move the levers to the center, unlocked position.
2. To go backward, slowly pull the motion control
levers rearward
22
Releasing
19).
(Figure 20).
Figure 20
(Figure 21).
g008952