golmar SV-372S Color Instruction Manual page 19

58
S
ections chart.
(5) Cable (twisted/ multipaired)
AWG24: 2 wire (0,20mm²)
AWG19: 2 wire (0,65mm²)
AWG19: 2x2 wire (0,65x2= 1,30mm²)
CAT6 AWG23: 2 wire (0,26mm²)
CAT6 AWG23: 2x2 wire
(0,26x2= 0,52mm²)
2 wire (1,50mm²)
IMPORTANT:
(1) BUS, BUS :Maximum distance between furthest door panel and power supply.
(2) BUS, BUS :Maximum distance between furthest monitor and power supply.
Maximum distance between Master monitor and Slave monitor: 20m.
(3) BUS, BUS :Maximum distance between furthest door panel and the last monitor.
Maximum distance between Master monitor and Slave monitor: 20m.
Place the power supply anywhere on the BUS.
(4) CV, CV :Maximum distance: 5m (cable AWG19).
(5) Only use parallel or twisted cable, not use single-wire cable.
Do not vary in cross section throughout the entire installation.
C
onnection of an a.c. lock release by using TF-104 transformer and
SAR-12/24 relay.
PVS-222
NO C
colour
NC
SAR-12/24
IN
CV CV BUS BUS
INSTALLATION DIAGRAM
Terminal
(1)BUS,BUS (2)BUS,BUS
25m. 25m.
50m. 50m.
100m. 50m.
50m. 100m.
40m. 25m.
80m. 50m.
50m. 80m.
-------- --------
NA C
SEC
~
IN
(3)BUS,BUS CV, CV
-------- (4)
-------- (4)
-------- (4)
-------- (4)
-------- (4)
-------- (4)
-------- (4)
120m. 20m.
TF-104
PRI
~ ~ ~
230Vac
12Vac