Removing The G8296 From A Lenovo System X Or Power Rack - Lenovo RackSwitch G8296 Installation Manual

Removing the G8296 from a Lenovo System x or Power Rack

© Copyright 2015 Lenovo
This section describes how to remove the G8296 from a Lenovo System x or Power
4-post rack.
To remove the G8296 from a System x or Power rack, complete the following steps:
1. Disconnect all external cables.
2. If the air-duct option has been installed, remove it as described in
the Air-Duct Option" on page
3. At the rear of the rack, loosen and remove M3.5 screws that secure the rear
brackets to the front brackets.
4. Loosen and remove M6 screws and clip nuts that attach the rear mounting
brackets to the rear rack posts, and then slide the rear mounting brackets free
of their slots.
67.
Chapter 4: Removing and Replacing G8296 Components
"Removing
63