Fetco CBS-2031e Programming Instructions

Programing Instructions for Extractor

Advance to Next

Parameter
FETCO, LUXUS, Extractor, Millenia, Pulse-Brew are all trademarks or registered trademarks of FETCO.
Extractor
Turn the brewer off by pressing the main power switch
(located under the front panel, directly behind the front
leg). Press the main power switch again to turn the unit on.
Display will read "Stby".
Quickly hold the stop button for 3 seconds. The display will
read "Prg" while you are holding in the stop button. After 3
seconds the display will read the software version and then
switch to the programing display.
The programming display shows 2 series of numbers. The
first series shows the batch number and parameter number.
For example 1.1 = batch 1, parameter 1. The second series
of numbers is the setting for that specific parameter.

Scroll Up

Coffee Brewing Systems
TM

Scroll Down

Save Changes

and Exit