Fetco CBS-2051 Technical Bulletin

TECHNICAL
BULLETIN
Brew Valve Replacement Kit
Subject:
Applies to: CBS-2051, 2052, 2051e, 2052e & 2052e20
The brew valve used on the models listed above has been changed to a compatible valve
from a different manufacturer, Beta Valve. It is a direct replacement for the original valve.
New part numbers have been assigned for the replacement valve kits:
• Part # K054 brew valve replacement kit, 120VAC (For USA/Canada versions)
• Part # K055 brew valve replacement kit, 230VAC (For EXPORT versions)
• Part # K057 valve rebuild kit, Beta
On some brewers, the existing white neutral wire piggy-back connector will not fit on the
new valve. For this reason, a white wiring harness is provided to replace the existing
harness. If the existing piggy-back connector fits, the new wiring harness is not needed.
The ground terminal on the new valve is not used.
NOT USED
(GROUND)
FETCO ♦ 600 Rose Road ♦ Lake Zurich, IL 60047-0429 USA ♦ Tel. (800) 338-2699 or (847) 719-3000 ♦ Fax: (847) 719-3001
(Replacement for part # 57042 valve assy.)
(Replacement for part # 57075 valve assy.)
(Includes diaphragm, spring, and plunger)
TAPERED END OF
SPRING SHOULD
FACE UP.
NUMBER
20
www.fetco.com
email : techsupport@fetco.com
Date:
TO BREW VALVE
(REPLACEMENT FOR EXISTING
TO BYPASS VALVE
November 28, 2005
Rev. February 23, 2006
TO BREW
BASKET LOCK
WIRING HARNESS
HARNESS, IF NEEDED.)