Photon Focus MV1-D3360-160-CL Series User Manual page 70

Cmos camera with cameralink interface

Table of Contents

6 Hardware Interface

Serial communication: A CameraLink

compatible asynchronous serial interface. This interface is contained within the

CameraLink

interface and is physically not directly accessible. Refer to Section 5.12 for

more information.

+ a m e r a

Figure 6.3: CameraLink interface system

The frame grabber needs to be conﬁgured with the proper tap and resolution settings,

otherwise the image will be distorted or not displayed with the correct aspect ratio. Refer to

Table 4.3 and to Section 4.6 for a summary of frame grabber relevant speciﬁcations. Fig. 6.3

shows symbolically a CameraLink

relevant application note [AN021] on the Photonfocus website.

camera can be controlled by the user via a RS232

I m a g e d a t a ,

F V A L , L V A L , D V A L

P i x e l C l o c k

C C S i g n a l s

S e r i a l I n t e r f a c e

system. For more information about taps refer to the

F r a m e -

g r a b b e r

Table of Contents