Table of Contents
Advertisement
3 How to get started (CameraLink
Figure 3.1: Camera with protective cap and lens.
To choose a lens,
www.photonfocus.com.
5.
Connect the camera to the frame grabber with a suitable CameraLink
Figure 3.2: Camera with frame grabber, power supply and cable.
Do not connect or disconnect the CameraLink
For more information about CameraLink
6.
Connect a suitable power supply to the provided 7-pole power plug. For the connector
assembly see Fig. A.1. The pinout of the connector is shown in Appendix Appendix A.
12
®
)
see the Lens Finder in the 'Support' area at
®
®
cable while camera power is on!
®
see Section 5.12.
cable (see Fig. 3.2).
Advertisement
Table of Contents
