Removal Of Pcb - Daikin FTKE25BVM Service Manual

Si12-411A
2.3 Removal of
Procedure
Step
1. Removing the controller
PCB
Remove 1 screw of the
1
PCB, and release two
tabs.
Release the tabs of the
2
terminal board, and
open the terminal
board.
3 Disconnect each
connector on the back
of the terminal board.
Disconnect the service
4
monitor PCB connector.
Removal Procedure
PCB
Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
Outdoor Unit (50 / 52 / 58 / 68 / 75 Class)
Points
Release the tab to remove
the service monitor PCB.
247