Removal Of Sound Insulation And Reactor - Daikin FTKE25BVM Service Manual

Si12-411A
1.7 Removal of
Procedure
Step
Release the clip fixing
1
the compressor lead
wire.
Remove 2 screws of
2
the partition board, and
move the board
leftward.
Remove the noise
3
insulation (outer).
Removal Procedure
Sound Insulation
Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
Outdoor Unit (80 / 90 Class)
and Reactor
The partition board is not
removable as it is fixed with
the fitting screw in the rear
bottom.
Carefully remove the noise
insulation, which is easily
torn in the piping section.
Points
235