Table of Contents
Advertisement
TRENDnet User's Guide
5. The founded cameras will show on the screen. The camera already selected by
default if you have only one camera installed. If you have more than one camera in
the same Network, you will need to identify the camera by the MAC ID. Click Next.
6. Select "DHCP" option to assign an IP by DHCP server or Select "Fixed IP" to set IP
address manually. Click Next.
© Copyright 2017 TRENDnet. All Rights Reserved.
7. If you select "Fixed IP", fill out the IP address, subnet mask, default gateway, DNS
server. Please ensure that the IP address of the camera and the computer must
within the same network. Click Next.
8. Type in the Password. The default password is "admin". You must change the default
password of the camera. Enter the default password: admin and enter the new
password. The password must be between 8 and 32 characters. (Alphanumeric: a‐z,
A‐Z, 0‐9), and entering the password two to confirm password.
Limited Warranty
6
Advertisement
Table of Contents
