TRENDnet TV-IP321PI User Manual

TRENDnet TV-IP321PI User Manual

Outdoor 1.3 mp hd poe dome ir network camera
Hide thumbs Also See for TV-IP321PI:
Table of Contents

Advertisement

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TV-IP321PI and is the answer not in the manual?

Questions and answers

Summary of Contents for TRENDnet TV-IP321PI

  • Page 2: Preface

    TRENDnet User’s Guide TV-IP321PI Preface This user’s guide is written to demonstrate the TV-IP321PI camera installation and operation with firmware version 5.1.7 and above. Please download and upgrade the camera firmware to the latest version by visiting www.TRENDnet.com and then search of TV-IP321PI.
  • Page 3: Table Of Contents

    Tamper Detection ....................6 Playback ........................26 IPv6..........................6 Slice images from video playback ..............26 ONVIF .......................... 6 Download sections of video ................27 Free Apps ........................6 Download snapshots ...................27 Complimentary Software ..................6 © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 4 Direct video access - RTSP ..................57 Port ..........................36 Direct video access - HTTP ..................57 DDNS ..........................36 Get better video stream on TRENDnet View Pro ..........57 PPPoE ..........................37 Regulations ....................60 SNMP ..........................37 Federal Communication Commission Interference Statement ....60 802.1X ..........................
  • Page 5: Product Overview

    IP66 weather rated housing. It comes with a free Apple® and Android™ mobile app and D-WDR complimentary pro-grade software to manage up to 32 TRENDnet Digital Wide Dynamic Range improves video quality in high contrast cameras.
  • Page 6: Camera Management

    TRENDnet User’s Guide TV-IP321PI Camera Management Complimentary Software Complimentary pro-grade software to manage up to TRENDnet 32 Multi-Language Interface cameras Support for English, French, Spanish, German, and Russian Package Contents Advanced Playback TV-IP321PI package includes: Advanced in-camera archived video review functionality Dynamic DNS Support •...
  • Page 7: Physical Descriptions

    2. Horizontal stand 3. Vertical stand 4. Lower dome DC Power 10/100 PoE 5. Cables Network Port 12V DC 1A 6. Infra-red lamps (Optional) 7. Lens 8. Black Liner 9. Safety rope Reset Button © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 8: Warnings

    • To avoid heat accumulation, good ventilation is required for a proper operating environment. • Keep out of water and any liquid. • While shipping, the camera should be packed in its original packing. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 9: Installation Procedure

    • Moisture: Avoid damp or moist environments whenever you can. There are number of factors involved in a successful camera installation. The TV-IP321PI is an IP66 grade water proof camera, and it will Follow the suggested installation steps and go through the check lists.
  • Page 10: Setup Your Camera With Cd

    * A power adapter (sold separately) can be used instead of PoE switch. and then click the Install Camera. 4. Wait while the utility is searches for the camera. 2. Write down the MAC Address of the camera. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 11 MAC address. Select the camera and then click Next. 6. Select the DHCP option to assign IP address dynamically, or select Fixed IP to assign the camera an IP address, and then click Next. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 12 Change Password box and click next to get the link to access your camera.) 9. The setup wizard is verifying your installation. Enter the user name admin and the password you’ve just set and then click OK. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 13 You can also download a free app to view video on your mobile devices. Scan the QR code to find and install the TRENDnetVIEW app. Free App Night Vision © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 14: Hardware Installation

    Waterproof cap The TV-IP321PI itself is IP66 grade water and dust proof. There is a set of network cable water proof caps that comes with the package as well. Run your cable going through the accessories, and then crimp the cable with an RJ45 module.
  • Page 15 Cable Loosen the tilt lock screws, adjust the tilting position in a range from 15 to 90, and tighten the tilt lock screws. Screw © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 16: Access Your Camera With The Web Browser

    “TV-IP321PI” and download the software. If you didn’t go through the TV-IP321PI CD installation wizard or you have reset the TV-IP321PI to factory defaults by pressing and holding reset button while power on the camera and keep holding the button for...
  • Page 17 7. Click Finish to finish the installation. 5. Permission request may show up depends on the Internet security settings on your computer. Click More Info and then Run anyway to install the plug- in. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 18 8. Open the browser and login again. 9. (Go to step 11 if you already changed your password with the setup CD). The TV-IP321PI will ask you to change your password from default setting. Please enter the new password twice and click OK.
  • Page 19: Logging-In To The Camera For The First Time (Os X)

    IP address on your home gateway), and then press Enter. 2. Enter the user name, admin, and the default password, admin, and then click OK. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 20 Click the WebComponents.pkg and then click Open. (If you are install the plug-in from the CD, just browse to /Mac folder and double click the WebComponents.pkg file.) 8. Select a destination to install the plug-in. Then click Continue. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 21 TRENDnet User’s Guide TV-IP321PI 9. Use the default location and click Install. 11. Installation will process automatically. 10. Enter your password and click Install Software 12. Click Close to exit the installation. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 22 13. Open the browser and login again with the default IP 192.168.10.30 or the IP that was dynamically assigned by your router. 16. The TV-IP321PI will ask you to change your password from the default setting. Please enter the new password twice and click OK.
  • Page 23 A-Z, 0-9, !, @, #, $). 17. Enter the user name admin and new password again to start secured session. 18. The Live View page shows up and the video starts to stream. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 24: Live View

    See Live View Settings on zoom, recording video, and suc- bandwidth consumption. Switch to to exit full screen mode. page 33 for details. cessfully taking a snapshot. view of different video streams by clicking this icon. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 25: Playback

    Click the date selection, and then choose a date as the date range of searching. Click Search to start searching. to confirm selection and then click X to then click close this dialog box. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 26: Playback

    Click this button to stop clipping a video from playback. Where can I find saved files? Videos and snapshots captured from Playback will be saved to your computer Live View Settings on page 33 for details. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 27: Download Sections Of Video

    Download. Where can I find saved files? Videos and snapshots captured from Playback will be saved to your computer Live View Settings on page 33 for details. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 28: Log

    Search for logs Click the type of log and then the Start Time and End Time. Click Search The log of the TV-IP321PI will be saved on the network storage. You can to start searching. search the relevant records and save to your local computer. (See Network Storage on page 54 to setup the storage.)
  • Page 29: System Information

    TRENDnet User’s Guide TV-IP321PI System Information System Information page shows the TV-IP321PI’s basic information. Click System then click System Info to show the page. Basic Information Device Name: Human readable device name for easy identification. Firmware Firmware version Version: MAC Address: The MAC address of Ethernet Interface System Time: The system time setup in the camera.
  • Page 30: System Configuration

    Un-checking this box will allow everyone access to this video stream without authentication. Default: Checked. HTTP: TV-IP321PI can be accessed via password protected web management interface. Un-checking this box will allow anyone to access this camera and change its settings.
  • Page 31: User Accounts

    (RTSP). Only one accurate logging. You can synchronize the system time with your administrator account can be setup to configure the TV-IP321PI and computer, or automatically check the time accuracy with a network time cannot be deleted.
  • Page 32: Daylight Savings

    DST Bias Enter how much time the daylight saving adjusted by Check the Sync. with computer time to copy the time daylight savings. from your computer. Click Save to save the changes Click Save to save the changes © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 33: Live View Settings

    Medium size can have moderate video stream smoothness and time choose a new destination if you want to save the delay. file somewhere else. Click Save to save the changes © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 34: Maintenance

    TRENDnet model and version. To find out if there is a firmware upgrade available for your device, please check your TRENDnet model and version using the link. http://www.trendnet.com/downloads/ 1. If a firmware upgrade is available, download the firmware to Reboot your computer.
  • Page 35: Network Settings

    DHCP: Check this box if the IP address is assigned by DHCP server. IPv4 Address: The IPv4 dynamic or static address Subnet Mask: Network range of the subnet Default The default route going further from TV-IP321PI Gateway: IPv4 subnet IPv6 IPv6 Mode: Choose Manual, DHCP, or Route Advertisement.
  • Page 36: Port

    TRENDnet User’s Guide TV-IP321PI Port DDNS You can change the service port numbers of TV-IP321PI and Dynamic Domain Name Service, DDNS, allows you to find your camera enable/disable RTSP or HTTPS services. from the Internet with an easy to remember domain name.
  • Page 37: Pppoe

    Enable PPPoE: Check this box to enable PPPoE connection. Dynamic IP: The IP address assigned by ISP User Name: Enter the account name. Password: Enter the password. Confirm: Enter the password again. Click Save to save the changes © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 38 Specify the authentication password between 8 to Password: 32 letters. Private-key Choose the privacy key to encrypt SNMP Algorithm: messages: DES or AES. Private-key Specify the privacy key between 8 to 32 letters. Password: © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 39: Ip Address Filter

    Enter the IP address then click OK Delete: To delete an entry on the list, highlight the entry by clicking on it. Then, click Delete Clear: To clear all entries, click Clear Click Save to save the changes © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 40: Quality Of Service (Qos)

    Click Save to save the changes IP Address Filter Video/Audio Enter Video/Audio DSCP. Default: 0. DSCP: Event/Alarm Enter Event/Alarm DSCP. Default: 0. DSCP: Management Enter Management DSCP. Default: 0. DSCP: Click Save to save the changes © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 41: Video Settings

    MJPEG is a legacy coding creates larger video file size and has robust file structure and better device compatibility. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 42: Display Settings

    Saturation: Use the slider or enter a number (0-100) to adjust the color saturation. The greater number means the color will be more saturated. Default: 50 Sharpness: Use the slider or enter a number (0-100) to adjust the image sharpness. Default: 50 © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 43 Sensitivity: The light sensor sensitivity. Switch Time: The time delayed to switch between modes. Longer switch time can prevent unnecessary mode flipping if an object is blocking the light source temporarily. Range: 5-120 seconds, default: 5 seconds. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 44: On Screen Display Settings

    Compare and reduce noise between video frames. Range: 0-100%, default : 100% screen size automatically. Click Reset to reset the display adjustments Move the red box to position the text. Click Save to save the changes. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 45: Text Overlay

    English characters. Clear All: Click this button to clear all the masking Move the red box to position the text. areas. Click Save to save the changes Click Save to save the changes © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 46: Video Recording

    5. Click another day of the week by clicking Click Save to save the changes on its tab to set the next schedule. Click OK when you have finished your settings. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 47: Events

    Tracking current status of motion detection. The motion tracking is displayed with grids in green. The grid area represents the camera motion is happening. Click Save to save the choices. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 48 4. Click Select All or the weekday you want to have the same schedule on different day. 5. Click another day of the week by clicking on its tab to set the next schedule. Click OK when you have finished your settings. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 49: Video Tampering

    Upload to FTP: Check this box to send snapshots to an FTP server when motion is detected. Click Save to save the changes © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 50 Click OK when you have finished your settings. Notification Send Email: Check this box to send an e-mail notification when motion is detected. Click Save to save the changes © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 51: Exception

    Exception First, choose the exception type, and then Type: choose the corresponding action. Send Email: Check this box to send an e-mail notification when motion is detected. Click Save to save the changes © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 52: Snapshot

    Resolution: Uses the same resolution set in Video Format for the snapshot resolution. Quality: Choose a compression quality for snapshots. Interval: State the time interval between snapshots. The default interval is 10 seconds. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 53: Email

    *Note: Many ISPs does not allow service port 25 going through their network. sender. Other popular ports are 587 and 465. Please consult your email service provider Sender’s Enter sender’s email address. and ISP for detail. Address: SMTP Server: Simple Mail Transportation Protocol Server © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 54: Network Storage

    You can create a folder under the shared folder and make it a network volume here. Just create the folder and enter The TV-IP321PI supports two formats of network storage file systems: the correct path name here. NFS and CIFS. NFS, Network File System, is natively supported by Linux Capacity: Enter the size of the disk space you want to assign for computers and most NAS, Network Attached Storage.
  • Page 55: Storage Management

    Note: The formatting progress depends on the size of the storage and the network bandwidth. It takes a while if you are formatting a big volume or the network connection is not stable. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 56: Ftp Server

    Directory:  Use Camera Name: Use the camera name to organize the saved files.  Use Camera IP: Use the camera IP address to organize the saved files. Click Save to save the changes © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 57: Appendix

    Get better video stream on TRENDnet View Pro The TRENDnet View Pro is installing the TV-IP321PI sub stream video by default for better connectivity. If your TRENDnet View Pro server is located on the same local network with your camera and you have good enough available bandwidth, you can change the setting on TRENDnet View Pro to get the main stream RTSP video with better picture quality.
  • Page 58 Select Video Input tab. And then choose RTSP (RFC 2326) mainstream video. Click RTSP tab if you want to check or change the default RTSP settings. Click Property to setup the camera property. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 59 TRENDnet User’s Guide TV-IP321PI Click Next or make your changes through the wizard . © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 60: Regulations

    This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. © Copyright 2015 TRENDnet. All Rights Reserved.
  • Page 61: Europe - Eu Declaration Of Conformity

    Malti [Maltese] Hawnhekk, TRENDnet, jiddikjara li dan TV-IP321PI jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li Česky [Czech] TRENDnet tímto prohlašuje, že tento TV-IP321PI je ve shodě se hemm fid-Dirrettiva 2004/108/KE u 2006/95/KE. základními požadavky a dalšími příslušnými ustanoveními Magyar Alulírott, TRENDnet nyilatkozom, hogy a TV-IP321PI megfelel a...
  • Page 62: Limited Warranty

    Go to http://www.trendnet.com/gpl or http://www.trendnet.com Download shipping from outside of the USA and Canada are responsible for return section and look for the desired TRENDnet product to access to the GPL Code or shipping fees. Customers shipping from outside of the USA are responsible for LGPL Code.

Table of Contents