Table of Contents
Advertisement
TRENDnet User's Guide
Network >> Advanced >> QoS/DSCP
DSCP specifies a simple mechanism for classifying and managing network traffic and
provide QoS on IP networks. DSCP is a 6‐bit in the IP header for packet classification
purpose.
The number 0~63 for Live Stream, Event / Alarm, and Management represent the ratio
that the bandwidth is divided. For example, if you set 5, 10, and 20 for these three items,
then the bandwidth of these items is 5:10:20. The item getting more bandwidth has lower
probability to be delayed. There is no difference between setting "0, 0, 0" or "63, 63, 63"
because under these two setting the three items will get equal bandwidth (1/3).
The three stream control the protocols respectively:
Live Stream (Video and audio) : RTP / RTSP
Event/Alarm : FTP / SMTP / SAMBA / SIP
Management : HTTPS / HTTP / SNMP
Note: The "Management" stream handles both the live view and the setting area of the
web page on which the data is transferred via http/https protocol. If you prefer to
distribute more bandwidth when using the web browser to watch the live video, please
adjust the Management Stream instead of Live Stream.
© Copyright 2017 TRENDnet. All Rights Reserved.
Network >> Advanced >> IEEE 802.1x
IEEE 802.1x is an IEEE standard for port‐based Network Access Control. It provides an
authentication mechanism to device wishing to attach to a LAN or WLAN. To use this
function, you need a device to build IEEE 802.1x LAN at first.
The EAPOL protocol support service identification and optional point to point encryption
over the local LAN segment.
Please check what version of the authenticator and authentication server support. This
camera supports EAP‐TLS method. Please enter ID, password issued by the CA, then
upload related certificates.
Limited Warranty
19
Advertisement
Table of Contents
