Table of Contents
Advertisement
17
SERVICE WORK ON THE ENGINE
17.3
Changing the engine oil and oil filter, cleaning the oil screens
Warning
Danger of scalding Engine oil and gear oil get very hot when the motorcycle is ridden.
–
Wear appropriate protective clothing and safety gloves. In case of burns, rinse immediately with lukewarm water.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Info
Drain the engine oil only when the engine is warm.
The engine oil is at a level between the middle
level viewer.
»
If the engine oil is not up to the middle
–
Preparatory work
(EXC‑F AUS, EXC-F SIX DAYS)
–
Remove the engine guard. (
–
Park the motorcycle on a level surface.
Main work
–
Place a suitable container under the engine.
–
Remove oil drain plug
–
Remove screw plug
101462-10
–
Remove screw plug
101464-10
–
Remove screws
101468-10
Add engine oil. (
p. 99)
x
p. 68)
with the magnet and seal ring.
1
with the short oil screen.
2
with the long oil screen
3
. Remove the oil filter cover with the O-ring.
5
and upper edge
A
B
of the level viewer:
A
.
4
97
of the
Advertisement
Table of Contents
