Part Identification Chart - Weslo WLEX61110.0 User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included.
M8 Locknut M10 Locknut M4 x 13mm M4 x 19mm
(35)––2 (45)––2 Truss Screw Screw (49)––2
(42)––4
M6 x 20mm M6 x 42mm Screw (48)––4 M8 x 20mm
Screw (47)––4 Screw (40)––7
M8 x 56mm Screw (46)––2 M8 x 81mm Bolt (39)––2
M10 x 65mm Bolt (28)––2 M10 x 70mm Screw (44)––2
5