Advertisement
ORDERING REPLACEMENT PARTS
If you encounter any problems with this product or if your need to order replacement parts, contact the ICON
Health & Fitness, Ltd. office, or write:
ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road
Leeds
LS118JG
Tel: Country Code: 0345-089009
0345-089009
Fax: 0113-2411120
To help us assist you, please be prepared to give the following information:
• The MODEL of the product (WLEMSY80000)
• The NAME of the product (WESLO
®
GYM 2000 weight system)
• The SERIAL NUMBER of the product (see the front cover of this manual)
• The KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST on page 18 of this manual).
Part No. 172020 R0301A
Printed in Canada © 2001 ICON Health & Fitness, Inc.
Model No. WLEMSY80000
Serial No.
Serial Number Decal
QUESTIONS?
As a manufacturer, we are
committed to providing
complete customer satisfaction.
If you have questions, or if
there are missing parts, we will
guarantee complete satisfaction
through our Customer Service
Department.
Please CALL:
0345-089009
Or WRITE:
ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road
Leeds
LS118JG
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
USER'S MANUAL
Visit our website at
www.weslo.com
new products, prizes,
fitness tips, and much more!
Advertisement
Related Manuals for Weslo WLEMSY80000
Summary of Contents for Weslo WLEMSY80000
-
Page 1: Ordering Replacement Parts
Tel: Country Code: 0345-089009 0345-089009 Fax: 0113-2411120 To help us assist you, please be prepared to give the following information: • The MODEL of the product (WLEMSY80000) • The NAME of the product (WESLO ® GYM 2000 weight system) Serial Number Decal •... -
Page 2: Table Of Contents
ORDERING REPLACEMENT PARTS ..........Back Cover Note: A PART IDENTIFICATION CHART is attached in the centre of this manual. Remove the PART IDENTIFI- CATION CHART before begining assembly. 6 20 WESLO is a registered trademark of ICON Health & Fitness, Inc. -
Page 3: Important Precautions
PART LIST—Model No. WLEMSY80000 IMPORTANT PRECAUTIONS R0301A Key No. Qty. Description Key No. Qty. Description WARNING: To reduce the risk of serious injury, read the following important precautions 5/16” x 2 1/2” Carriage Bolt 7” Handle before using the weight system. -
Page 4: Before You Begin
The goal is to tone your body, build dramatic muscle size model number is WLEMSY80000. The serial number and strength, or improve your cardiovascular system, can be found on a decal attached to the weight system 8—Top Framer... -
Page 5: Assembly
TROUBLE-SHOOTING AND MAINTENANCE ASSEMBLY Inspect and tighten all parts each time you use the weight system. Replace any worn parts immediately. The weight system can be cleaned using a damp cloth and mild non-abrasive detergent. Do not use solvents. Make sure you have the following tools: Make Assembly Easier for Yourself. - Page 6 2. Press the two 2” Outer Caps (88) onto the ATTACHING THE LEG LEVER TO THE LOW Stabiliser (5). PULLEY STATION Insert two 5/16” x 2 3/4” Carriage Bolts (14) up To use the Leg Lever (29), the seat must be attached through the Stabiliser (5).
- Page 7 4. Press two 2” Inner Caps (27) into the Top Frame ADJUSTMENT (67). Attach the Top Frame (67) to the Rear Upright (82), The instructions below describe how each part of the weight system can be adjusted. IMPORTANT: When the Front Upright (42), and the Stop Bracket (63) attaching the lat bar or nylon strap, make sure that the attachments are in the correct starting position with 5/16”...
- Page 8 7. Attach the upper ends of the Weight Guides (72) to 25. Press a 1 1/2” Inner Cap (32) into the Leg Lever the Top Frame (67) with the 5/16” x 6” Bolt (74), (29). the two Weight Guide Spacers (73), and a 5/16” Nylon Locknut (3).
- Page 9 22. Remove the preattached 3 1/2” Pulley (15) and 10. Insert the two 4 1/2” “L” Pins (60) down into the Cable Trap (59) from the Pulley Plate (20). Wrap indicated holes in the Arm Frame (52) and the the Short Cable (23) under the Pulley. Reattach Arms (46).
- Page 10 14. Insert two 3/8” x 1 3/4” Bolts (12) through the two . Slide the Long Cable (66) between the 3 1/2” “I” Plates (78) and two 4 1/2” Pulleys (77) as Pulley (15) and the Cable Trap (59) on the shown.
- Page 11 REMOVE THIS PART IDENTIFICATION SHEET FROM THE MANUAL 1" Plastic Stop (64) This chart is provided to help identify the small parts used in assembly. The number in parenthesis following each part refers to the key number of the part. Note: Some parts may have been pre-assembled for ship- 1"...
- Page 12 5/16" x 2 1/2" Carriage Bolt (1) 1/4" Flat Washer (10) 5/16" Flat Washer (8) 3/8" Flat Washer (9) 5/16" x 2" Eyebolt (35) 5/16" x 2 3/4" Carriage Bolt (14) 1/4" x 3/4" Screw (18) 5/16" x 1 1/2" Bolt (24) 5/16"...
Need help?
Do you have a question about the WLEMSY80000 and is the answer not in the manual?
Questions and answers