Pitco SE Series Installation And Operation Manual page 10

POWER ON/OFF KEY
TO CHECK ACTUAL TEMP.
TO CHECK SET TEMP.
TO CHECK COOK, SHAKE, AND HOLD TIMES
NOTE: THE TIMES WILL BE DISPLAYED IN SEQUENCE PAUSING MOMEN-
TARILY ON EACH TIME AND THEN RETURN TO COOK MODE.
TO ENTER BOIL MODE
CHECKING THE REMAINING TIME WHEN USING MULTIPLE TIMERS
TO VIEW REMAINING TIME ON ANY FUNCTION KEYS WHEN MULTIPLE TIMERS ARE COUNTING IS AS FOLLOWS:
PRESS THEN PRESS FUNCTION KEY OF ANY NON DISPLAYED ACTIVE TIMERS YOU WANT TO VIEW
FIRST LEVEL PROGRAMMING
USING AND ENTERING FIRST LEVEL PROGRAMMING AND
PROGRAMMING FUNCTION KEYS
Press the
If you are unable to remember the set pass word use (6684).
TO PROGRAM SINGLE OR DUAL TANK
COMPUTER SET TEMP LEFT SIDE
TO PROGRAM DUAL TANK
COMPUTER SET TEMP RIGHT SIDE
TO SAVE OR EXIT
TO SET
TO SET
TO SET
TO SAVE OR EXIT
L20-246 Rev 3 (05/12)
MULTIPLE LEVEL COMPUTER
PROGRAMMING INSTRUCTIONS
PROGRAM KEY
TEMPERATURE KEY
PRODUCT KEYS
temperature is entered, boil mode will start automatically. You
must turn off both fryers to exit Boil mode.
key (display shows
COOK TIME
SHAKE TIME
HOLD TIME
TIME KEY
After 5 secs. machine will return to run mode.
After 5 secs. machine will return to run mode.
THEN THE PRODUCT KEY DESIRED
enter ( if using
"PROGRAM" ), then enter pass word if needed.
ENTER DESIRED TEMP.
AND A PRODUCT KEY THEN
ENTER TIME
ENTER TIME
ENTER TIME AND
5
POWER ON/OFF KEY
ºC mode) when last digit of