Camera Setup; Control Stick Movements - EverFocus HDCCTV EZH5242 User Manual

4. CAMERA SETUP

This camera utilizes
an On Screen Display
(OSD) user setup
menu that can be
navigated by a control
stick marked by (3 )
in the photo on the
right) that is located
next to the lens at the
front of the camera
housing. To access
this control stick, (1)
loosen the screws and
remove the Sunshield
and the Lock tab. (2) Twist the front cover carefully counterclockwise until the front cover unscrews
from the camera housing.

4.1 CONTROL STICK MOVEMENTS

To configure options on the OSD setup menu, move the control stick to do the actions described
below.
①
ENTER / CONFIRM
Press this button (by pressing straight down on the stick) to display the OSD's main menu on the
monitor that you have connected directly or indirectly to the camera's video connector. Also
press this button to confirm changes and to open the submenus when they're available and
selected. (Menu items with a "
items, select the desired menu item with the  and  buttons and press the ENTER button to
open the desired submenu. Use the  and  buttons to toggle between value options.)
②
SCROLL RIGHT
Press this button (by pressing the control stick to the right) to move the on-screen cursor to the
right to select items or to adjust the level/intensity of a selected function. The level/intensity
increases when this button is pressed.
③
SCROLL LEFT
Press this button (by pressing the control stick to the left) to move the cursor to the left to select
items or to adjust the level/intensity of a selected function. The level/intensity decreases when
this button is pressed.
Twist the front cover
carefully
" symbol at the end contain submenus. For adjusting submenu
<┘
10
The control stick
Remove the Lock tab
and the Sunshield