Advertisement
EBA1280 eZ.HD Series
1080p FHD IP66 IR Dome Camera
User's Manual
Copyright © EverFocus Electronics Corp.
Release Date: May, 2019
All the images including product pictures or screen shots in this document are for example
only. The images may vary depending on the product and software version. Information
contained in this document is subject to change without notice.
EverFocus Taiwan:
2F., No.12, Ln. 270, Sec. 3, Beishen Rd., Shenkeng Dist., New Taipei City 222, Taiwan
TEL: +886 2 2662 2338 FAX: +886 2 2662 3632 www.everfocus.com.tw
Advertisement
Table of Contents
Related Manuals for EverFocus EBA1280
Summary of Contents for EverFocus EBA1280
- Page 1 The images may vary depending on the product and software version. Information contained in this document is subject to change without notice. EverFocus Taiwan: 2F., No.12, Ln. 270, Sec. 3, Beishen Rd., Shenkeng Dist., New Taipei City 222, Taiwan TEL: +886 2 2662 2338 FAX: +886 2 2662 3632 www.everfocus.com.tw...
- Page 2 1. Introduction EverFocus eZ.HD series cameras – EBA1280 deliver 1080p full HD image quality. The model provides 2.8-12mm lens with ICR. Featured with Digital Wide Dynamic Range (D-WDR), the camera can provide clear images even under backlight circumstances where intensity of illumination can vary excessively.
- Page 3 1.3 Dimensions 120mm / 4.72" 1.4 Optional Accessory BA-E320 Color / Material: White / Metal Size (Φ x H): 138 x 54mm / 5.43”x2.13” Weight: 700g / 1.5lb BA-EB45 Color / Material: White / Metal Size (W x D x H): 245x160x163mm / 9.65”x6.3”x6.42” Weight: 2.1kg / 4.63lb 1.5 Cable Description Power Cable...
- Page 4 2. Installation 1. Stick the supplied Mounting Sticker to the surface to mark the 4 screw positions. Drill four holes on the surface and insert the supplied 4 Screw Anchors into the screw holes. If you want to run the cable through the surface, drill a hole within the 4 screw area.
- Page 5 b. If you want to wire the cables through the surface: Attach and screw the Camera Base to the surface with the supplied 4 Screws, and then attach the Camera Body to the Camera Base. Camera Base Wall Camera Body 4.
- Page 6 7. You can use the Joystick on the cable to configure camera OSD settings or switch to different video formats. Remove the Protection Cap from the Joystick before using it. Switching Video Format: Push the joystick up for 5 sec. to switch to •...
- Page 7 3. Configuration in the OSD Menu No Main Sub Menu Sub Menu / Function Brightness 0-100 Global Center Exposure Mode Return Gray World Mode R Gain 0-63 B Gain 0-63 Return Gain Day/Night Low/Middle/High Auto Gain Night/Day Low/Middle/High Mode Day/Night Color Return Contrast...
- Page 8 Color Red/Green/Blue Transparency On/Off Return Return Version Reset 10 Save & Exit 11 Exit...
Need help?
Do you have a question about the EBA1280 and is the answer not in the manual?
Questions and answers