Camera Setup Operations; Setup Buttons - EverFocus EQ610s User Manual

5. CAMERA SETUP OPERATIONS

This camera utilizes an On Screen Display (OSD) user setup menu.

5.1 SETUP BUTTONS

To set items on the user setup menu, use the following buttons on the back
panel.
① ENTER
Press this button (by pressing straight down on the stick) to display the
OSD's main menu on the monitor that you have connected directly or
indirectly to the camera's video connector. Also press this button to
confirm changes and to open the submenus when they're available and
selected. (Menu items with a "<┘" symbol at the end contain submenus.
For adjusting submenu items, select the desired menu item with the 
and  buttons and press the ENTER button to open the desired
submenu. Use the  and  buttons to toggle between value options.)
② R (RIGHT)
Press this button (by pressing the control stick to the right) to move the
on-screen cursor to the right to select items or to adjust the
level/intensity of a selected function. The level/intensity increases when
this button is pressed.
③ L (LEFT)
Press this button (by pressing the control stick to the left) to move the
cursor to the left to select items or to adjust the level/intensity of a
selected function. The level/intensity decreases when this button is
pressed.
④ D (DOWN)
Press this button (by pressing the control stick in the "down" direction)
to scroll the on-screen cursor downwards between menu items.
⑤ U (UP)
Press this button (by pressing the control stick in the "up" direction) to
scroll the on-screen cursor upwards between menu items.
Set (Enter) button
The cursor direction buttons and the SET/Enter button
7
EQ610s