Table of Contents
Advertisement
10. Type 1 and press Enter to continue.
11. When the update is completed, turn off the server.
12. Remove ac power from the server.
13. Move the boot block jumper back to pins 1 and 2.
14. Wait 30 seconds; then, connect the server to the ac power source.
15. Replace the cover; then, restart the server.
62
System x3100 Type 4348: Installation Guide
BIOS recovery
jumper (JP2)
4. Move the boot block recovery jumper to pins 2 and 3.
5. Wait 30 seconds; then, connect the server to the ac power source.
6. Insert the BIOS flash diskette into the external diskette drive.
7. Restart the server.
8. When POST starts, select 1 - Update POST/BIOS from the menu that
contains various flash (update) options.
9. When you are asked whether you want to save the current code to a diskette,
type N.
Attention:
Do not restart or turn off the server until the update is completed.
Boot block jumper (JP3)
Clear CMOS jumper (JP1)
Advertisement
Table of Contents
