IBM 4348 Installation Manual page 63

System x3100
Hide thumbs Also See for 4348:
Table of Contents

Advertisement

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v See the parts listing in the Problem Determination and Service Guide to determine which components are
customer replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
Error code
Description
I9990305
An operating system was not found.
19990650
The ac power has been restored.
Action
1. Make sure that a bootable operating system is
installed.
2. Run the hard disk drive diagnostic tests (see the
Problem Determination and Service Guide for
information about running the diagnostic tests).
3. Reseat the following components:
a. Hard disk drive cable
b. DVD drive and cables drive.
c. (Trained service technician only) System
board
4. Replace the components listed in step 3 one at a
time in the order shown, restarting the server
each time.
1. Reseat the power cord.
2. Check for the interruption of external power
source.
3. Replace the power cord.
Chapter 5. Solving problems
49

Advertisement

Table of Contents
loading

Table of Contents