Table of Contents
Advertisement
UP336BH (WDECT2355) ENG OM
REGISTER THE HANDSET
If you purchase an extra handset, you need to register the handset to the
base before use. Only one handset can be registered at a time.
The handset ID for the supplied handset(s) was assigned
at the factory, which has #1 or #2 in the display (#2 for
models that have two handsets in packaging). When you
register additional handset to the base, the handset ID
will be assigned.
1) Before registering the extra handset,
the battery pack must be charged for
15-20 hours.
2) Place the extra handset in the main
base unit to begin registration.
3) While the handset is registering,
Handset Registering will appear in
the LCD.
When Registration Complete is
displayed, the handset has been
registered to the base.
If Registration Failed appears,
please try these steps again.
12/28/04
9:22 AM
Page 57
1
Extra Handset
Charger
2
Extra Handset
Place the extra
handset in the main
base to register.
R e g i s t r a t i o n
C o m p l e t e
Extra Handset
+
3
Main Base
• An extra handset can
Place handset
on main base
to register
• Standby Mode -
Charge the handset
for 15-20 hours.
Main Base
4
Charger
be registered when
the main base is in
standby mode.
The handset is not in
use and
has
not been pressed.
[ 57 ]
Advertisement
Table of Contents
