Table of Contents
Advertisement
UP336BH (WDECT2355) ENG OM
Time stamp will not
be heard until you
have set the time.
[ 46 ]
12/28/04
9:21 AM
Page 46
Setting the Time
Follow these steps to set the clock on the answering system to the correct time.
1) Press clock/MENU.
2) Press
skip/SELECT or
repeat/SELECT until the correct day is announced and
the corresponding number (from 1 Sunday to 7 Saturday) appears.
3) Press SET to select the day.
4) Press
skip/SELECT or
repeat/SELECT until you hear the correct hour setting.
The numbers 1 through 12 appear on the base as each hour is announced.
5) Press SET to select the hour.
6) Press
skip/SELECT or
repeat/SELECT until you hear the correct minute setting.
The numbers 00 through 59 appears on the base as each minute is announced.
7) Press SET to select the minute.
8) Press
skip/SELECT or
repeat/SELECT until you hear the correct AM or PM setting.
The message counter displays A or P.
9) Press SET to select the AM/PM setting.
A confirmation tone sounds, and the day and time you set are announced for your review.
Setting a PIN code
To play your messages from a remote location, you will need to enter a two-digit Personal
Identification Number (PIN) code. To select a PIN code, perform the following steps:
1) Press clock/MENU twice. The current PIN code appears on the base and it is
announced.
2) Press
skip/SELECT or
repeat/SELECT until the desired number appears. Press
and hold
skip/SELECT or
numbers on the display.
3) Press SET to select the PIN code.
A confirmation tone sounds, the system announces the new PIN code.
repeat/SELECT to quickly scroll through the
Advertisement
Table of Contents
