Table of Contents
Advertisement
UP336BH (WDECT2355) ENG OM
Setting the call screen
You can screen calls when the Call Screen function is set to On.
1) Press clock/MENU six times.
The current Call Screen setting (On or Off) appears on the base.
2) Press
skip/SELECT or
3) Press SET. A confirmation tone sounds, and the system announces the new setting.
Screening a call
From the base
To screen an incoming call, do the following steps as follows:
1) After the answering system answers, the base speaker will let you
hear the calls as the machine records the message. To adjust the
volume, press
/vol/
To mute the call screen temporarily, press
the system is answering.
2) To answer the call, press
(when AutoTalk is set to On). If the handset is away from the base, press
speaker or any number key,
set to On).
The answering system will disconnect automatically.
From the handset
1) Press
when the system is answering.
To mute the call screen temporarily, press
2) To answer the call, press
and the system return to standby mode.
12/28/04
9:22 AM
Page 49
repeat/SELECT to choose On or OF.
or
/vol/
.
play/stop when
or pick up the handset from the base
, or
when the system is answering.
, otherwise press
• If you set the call
• If you press
• If you press
,
(when Any Key Answer is
to cancel the call screen
screen to off, you
can not screen a call.
, call
screen will be
canceled and the
handset is put in
talk mode.
while
another handset is
screening a call, you
will hear a beep and
you can not screen
a call.
[ 49 ]
Advertisement
Table of Contents
