Table of Contents
Advertisement
UP336BH (WDECT2355) ENG OM
For model number
verification, visit our
website
www.uniden.com.au
or www.uniden.co.nz
[ 60 ]
12/28/04
9:22 AM
Page 60
Call Transfer Feature
From handset to handset or to the base
1) During a call, press
/transfer/int'com on the handset.
2) Select a handset or the base to transfer the call within
10 seconds. (Refer to step 2 in the intercom section on
page 59).
The call will automatically be placed on hold, and an
intercom tone sounds.
To cancel the transfer, press
3) On the receiving handset, to answer the page, press
/transfer/int'com (or
, or
(when Any Key Answer is on), or pick up the handset from the
cradle (When Auto Talk is on).
4) To speak to the caller, press
From the base to a handset
1) During a call, press intercom on the base. The call will automatically be placed on hold.
2) Select the handset you want to talk with by pressing the number key (1-4). To page all
the handsets press
. An intercom tone sounds. To cancel the transfer, press
intercom or
on the base.
3) On the receiving handset, press
page. Or press any number key,
or pick up the handset from the cradle (when AutoTalk is On). The intercom mode is
activated, but the caller is still on hold.
4) To speak to the caller, press
REPLACING THE BASE
If the base unit is replaced with a different base from this same series of cordless
models, you must clear the handset(s) and base identification numbers. To do this, select
"System Reset" from handsets display menu option list (see page 21 for guidance).
Hold,to transfer
Handset
Base
or
on the initiating handset.
or
or intercom on the base). Or press any number key,
(or
on the base) on the receiving handset.
or
/transfer/int'com to answer the
, or
(when Any Key Answer is On),
or
speaker on the receiving handset.
#2
Advertisement
Table of Contents
