Register The Handset - Uniden WDECT 2355+3 Quick Start Manual

REGISTER THE HANDSET

If you purchase an extra handset, you need to register the handset to the
base before use. Only one handset can be registered at a time.
The handset ID for the supplied handset(s) was assigned at
the factory, which has #1 or #2 in the display (#2 for
models that have two handsets in packaging). When you
register additional handset to the base, the handset ID will
be assigned.
1) Before registering the extra handset,
the battery pack must be charged for
15-20 hours.
2) Place the extra handset in the main
base unit to begin registration.
3) While the handset is registering,
Handset Registering will appear in
the LCD.
When Registration Complete is
displayed, the handset has been
registered to the base.
If Registration Failed appears,
please try these steps again.
P l ac e ha n d s et
o n m a i n b a s e
t o r e g is t e r
1
Charge the handset
Extra Handset
for 15-20 hours.
Charger
2
Extra Handset
Place the extra
handset in the main
base to register.
Main Base
R e g i s t r a t i o n
C o m p l e t e
Extra Handset
+
3
Main Base
• An extra handset can
be registered when
the main base is in
standby mode.
• Standby Mode -
The handset is not in
use and
not been pressed.
4
Charger
has
[ 57 ]