Middle Housing - Epson Stylus NX100 Service Manual

Epson Stylus NX100/105/SX100/105/TX100/101/102/103/105/106/109/ME 300/ME OFFICE 360/NX110/115/SX110/115/TX110/111/112/113/115/117/119

4.3.6 Middle Housing

Parts/Components need to be removed in advance:
Scanner Stand/Cover Wire(p 68), Scanner Unit
Removal procedure
1. Remove the six screws.
Rear Side
Lower Housing
Figure 4-15. Removing the Middle Housing (1)
DISASSEMBLY/ASSEMBLY
(p 70), Panel Unit (p 72)
Hook
Middle Housing
SCREW M3x10 P-TITE (5±0.5kgfcm)
Removing the Housing
2. Release the two hooks on the left, two hooks on the right, and the hook on the
rear (see Fig.4-15
), then remove the Middle Housing from the Lower Housing.
Left Side
Right Side
Figure 4-16. Removing the Middle Housing (2)
When installing the Middle Housing, first align the hook A on the
front left, and then attach the housing. (See Fig.4-16.)
Revision C
Hook A
Hook
Hook
71
Confidential