Epson Stylus NX100 Service Manual page 103

Epson Stylus NX100/105/SX100/105/TX100/101/102/103/105/106/109/ME 300/ME OFFICE 360/NX110/115/SX110/115/TX110/111/112/113/115/117/119
Put double-sided tape (8mm x 30mm) on the Lower Housing as
shown below to secure the Waste Ink Pad A, B and the Waste
Ink Pad E on the 0-column side.
• Waste Ink Pad A: 2 points (
• Waste Ink Pad B and Waste Ink Pad E on the 0-column side
together: 1 point (
Double-sided
Tape
Figure 4-103. Installing the Waste Ink Pads (3)
When installing the Waste Ink Pad E, align it to the surface of
the Lower Housing not to let the pads protrude.
Figure 4-104. Installing the Waste Ink Pads (4)
DISASSEMBLY/ASSEMBLY
)
)
B
Double-sided
Tape
A
E
E
Lower Housing
Disassembling the Printer Mechanism
When installing the Waste Ink Pad D, make sure to fit it evenly
1.5mm lower than the platen surface of the Lower Housing.
If the Lower Housing is contaminated with the liquid of the
Waste Ink Pad D, make sure to wipe it off with alcohol.
Lower Housing
Figure 4-105. Installing the Waste Ink Pads (5)
Whenever the Waste Ink Pads removed/replaced, the required
A D J U S T M E N T
R E Q U I R E D
adjustments must be carried out.
• Chapter 5 " ADJUSTMENT" (p.110)
Revision C
D
103
Confidential