Epson Stylus NX100 Service Manual page 44

Epson Stylus NX100/105/SX100/105/TX100/101/102/103/105/106/109/ME 300/ME OFFICE 360/NX110/115/SX110/115/TX110/111/112/113/115/117/119
Occurrence
timing Detailed phenomenon
CR position
The top edge of paper does not go
through between the EJ Roller Unit and
the EJ Frame Assy.
• Operation
• –
The top edge of paper is not loaded to the
PF Roller Unit.
In case that the paper jam error occurs in each operation, the jammed paper contacts the nozzle surface of the Printhead and the Printhead may be damaged.
Note * :
TROUBLESHOOTING
Table 3-4. Check point for Paper jam error according to each phenomenon
Defective
unit/part name
2. Check if the Wheel Star Metal, Spring Star Wheel and
Wheel Star Exit come off.
EJ Frame Assy*
1. Check if the EJ Roller is correctly assembled.
EJ Roller*
2. Check if the EJ Roller Gear is damaged.
1. Check if the Upper Paper Guides correctly assembled.
Upper Paper Guide*
Error Indications and Fault Occurrence Causes
Check point
Wheel Star Metal
Spring Star Wheel
Wheel Star Exit
EJ Roller
Upper Paper Guide
Revision C
Remedy
2. Reassemble the Wheel Star Metal, Spring Star
Wheel and Wheel Star Exit correctly.
1. Reassemble the EJ Roller correctly.
2. Replace the EJ Roller Gear with a new one.
1. Reassemble the Upper Paper Guide to the Main
Frame correctly.
Confidential
44