Epson Stylus NX100 Service Manual page 114

Epson Stylus NX100/105/SX100/105/TX100/101/102/103/105/106/109/ME 300/ME OFFICE 360/NX110/115/SX110/115/TX110/111/112/113/115/117/119
Priority
Adjustment Item
Part Name
Remove
Upper paper guide
Replace
Remove
PF roller
Replace
Remove
Waste ink pad
Replace
Remove
Ink System
Replace
Remove
PF Motor
Replace
Remove
PF Encorder/PF Scale
Replace
Remove
CR Scale
Replace
When the EEPROM data copy is impossible with the main
C A U T I O N
board that needs to be replaced, the Waste Ink Pad must be
replaced after replacing the main board with a new one.
After all required adjustments are completed, use the "Final
check pattern print" function to print all adjustment patterns
for final check. If you find a problem with the printout patterns,
carry out the adjustment again.
When using a new main board for replacing the Printer
Mechanism, the initial setting must have been made to the main
board.
ADJUSTMENT
Table 5-4. Required Adjustment List
1 2 3
--- --- ---
--- --- ---
--- --- ---
--- --- ---
--- --- ---
--- --- O
--- --- ---
--- --- ---
--- --- ---
--- --- ---
--- --- ---
--- --- ---
--- --- ---
--- --- ---
Adjustment Items and Overview
4 5
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
<Meaning of the marks in the table>
"O" indicates that the adjustment must be carried out. "---" indicates that the adjustment is not re-
quired.
If you have removed or replaced multiple parts, make sure to check the required adjustments for
all the parts. And when multiple adjustments must be carried out, be sure to carry them out in the
order given in the "Priority" row.
Revision C
6 7 8
O O O
O O O
O O O
O O O
O O O
O O O
O O O
O O O
O O O
O O O
O O O
O O O
O O O
O O O
Confidential
9
O
O
O
O
---
---
O
O
O
O
O
O
O
O
114