Control Panel Functions - Epson Stylus NX100 Service Manual

Epson Stylus NX100/105/SX100/105/TX100/101/102/103/105/106/109/ME 300/ME OFFICE 360/NX110/115/SX110/115/TX110/111/112/113/115/117/119

1.6.2 Control Panel Functions

Button
Power
Stop
Stop
(when pressed for 3 seconds or more)
Scan
(NX110 series only)
Start Photo *3
(NX100 series only)
Start B&W/Copy B&W *3
Start B&W/Copy B&W
(when pressed for 3 seconds or more)
PRODUCT DESCRIPTION
Table 1-18. Buttons Functions
Printer Status
Power Off Turns the power OFF.
Power On
Turns the power ON.
Ejects the paper if the paper is not ejected yet.
Printing / Copying Stops printing immediately and ejects the paper. Cancels the job which is printing/copying at the same time.
Ink Out
Runs a sequence of ink cartridge replacement.
No Cartridge Performs the following sequence in due order each time the stop button is pressed.
1. Moves the carriage to the ink check positions.
Incorrect Cartridge
2. Moves the carriage there in the order of cyan, magenta, yellow, and black (prioritized order). Moves the carriage
to the ink cartridge replacement position after displaying all the colors to be displayed. (Skips the colors with
sufficient ink)
3. Moves the carriage back to the home position if it is at the ink cartridge replacement position, and performs
replacement cleaning.
Paper Out / Paper Jam
Stops printing and cancels the job.
Ejects the paper if the paper is not ejected yet.
Recovers from the error if the ejecting the paper is performed and successful.
Sleep
Recovers from sleep.
Performs recovering from sleep (Initialization of the printer mechanism, etc.) if necessary.
At power-on *1
Prints the nozzle check pattern.
After printing the nozzle check pattern, the printer turns on stand-by; the same status after initialization.
Stops printing and cancels the print job if the stop button is pressed during printing the nozzle check pattern. It
becomes ready after ejecting the paper.
Ready / Ink Low
Starts head cleaning.
Changes to the ink-out error status if the remaining ink level is not enough for cleaning.
Sleep
Recovers from sleep and starts head cleaning.
Changes to the ink-out error status if the remaining ink level is not enough for cleaning.
Ready / Ink Low The application on the PC automatically starts up and starts scanning.
Sleep Recovers from sleep and the application on the PC automatically starts up, and starts scanning.
Ready / Ink Low Adjust the size to the paper and starts color photo copying.
Sleep Recovers from sleep, adjust the size to the paper and starts color photo copying.
Ready / Ink Low Starts B&W copying.
Sleep Recovers from sleep and starts B&W copying.
Ready / Ink Low Adjust the size to the paper and starts B&W copying.
Sleep Recovers from sleep, adjust the size to the paper and starts B&W copying.
*2
Control Panel
Functions
Revision C
22
Confidential