Scanner Stand /Cover Wire - Epson Stylus NX100 Service Manual

Epson Stylus NX100/105/SX100/105/TX100/101/102/103/105/106/109/ME 300/ME OFFICE 360/NX110/115/SX110/115/TX110/111/112/113/115/117/119

4.3.4 Scanner Stand /Cover Wire

Parts/Components need to be removed in advance:
None
Removal procedure
Scanner Stand
1. Open the Scanner Unit.
2. Release the hooks (x2) at the lower part of the Scanner Stand.
Be careful not to lose the Scanner Stand Spring when removing the
C A U T I O N
Scanner Stand.
3. Release the guide pins (x2) at the upper part of the Scanner Stand, and remove
the Scanner Stand.
Scanner Stand Spring
Figure 4-9. Removing the Scanner Stand
DISASSEMBLY/ASSEMBLY
Scanner Unit
Scanner Stand
Guide pins
Hook
Removing the Housing
Cover Wire
1. Open the Scanner Unit.
2. Release both the hooks in the direction of arrow, and remove the Cover Wire.
Scanner Unit
Cover Wire
Figure 4-10. Removing the Cover Wire
When installing the Scanner Stand, secure the shorter leg of the
Scanner Stand Spring to the groove on the Scanner Unit, and secure
the longer to the hook of the Scanner Stand as shown below.
Scanner Stand
Figure 4-11. Installing the Scanner Stand
Revision C
Hook
Scanner Stand Spring
Groove
Hook
68
Confidential