Ptt To A Single Handset - AT&T TL92271 User Manual

Multiple handset use
Push-to-talk (PTT)

PTT to a single handset

1. You have 2 ways to begin a PTT call:
• If you have two handsets, press and hold PUSH TO TALK when the
handset is not in use.
-OR-
• If you have three or more handsets, press PUSH TO TALK when the
handset is not in use. Then, use the dialing keys to enter a handset
number (1-9 for handsets 1-9, TONE
and 1 for handset 11 or TONE
CID or DIR
or PUSH TO TALK to create the push-to-talk session.
2. Your handset displays Connecting to HANDSET X... for a few seconds.
When the connection is made, both your and the destination handsets
display Press and hold [PTT] to talk and beep once.
3. Press and hold PUSH TO TALK on your handset. A chirp indicates your
microphone is on. Speak towards the handset. Your voice is broadcast
to the destination handset. While you are speaking, the handset displays
PTT To HANDSET X (X represents the destination handset number).
Release PUSH TO TALK after speaking. Both handsets beep once again.
4.
After the handsets beep, you can press and hold PUSH TO TALK to continue
speaking or the destination handsets can respond (see Answer a PTT call
on page 57).
5. To end the PTT call, press
Push to talk Ended for a few seconds.
-OR-
Place the handset in the telephone base or charger to end the PTT call.
NOTE: After PUSH TO TALK is released, the PTT call remains open for a short time. If no
one presses PUSH TO TALK within 10 seconds, the PTT call ends automatically.
to scroll to the desired handset, then press
OFF/
and 0 for handset 10, TONE
and 2 for handset 12), or press
or END. The handset displays
CANCEL
55
SELECT