AT&T TL92271 User Manual page 21

Bluetooth
Bluetooth setup
7. Your cell phone may require a passcode. In this case the
handset screen displays Check cellular. ENTER PASS
CODE. Enter the cell phone passcode into the handset
SET
and press
8. Enter the PIN of the telephone base (the default PIN
is 0000) into your cell phone to continue the pairing
process. The handset displays Adding Cell Phone A to
device list...
9. When a device is successfully connected, the handset
displays Cell Phone A is added and connected to base.
You hear a confirmation tone. The corresponding status
icon ( 1 or
on the telephone base (DEVICE 1 or DEVICE 2) turns on.
If you have trouble pairing your cell phone, it may not be compatible
with your TL92271/TL92321/TL92371/TL92421/TL92471. Check the
Bluetooth compatibility list at
NOTES:
• The pairing process may take up to one minute. If the pairing process fails, try again.
• If you put the handset back in the telephone base or charger while pairing, the process
is cancelled and the handset returns to idle mode.
• If a device fails to connect, the handset displays Cell Phone A is added into the device
list, and then displays Please use cell to connect to base.
to save.
2) displays. The corresponding device light
www.telephones.att.com
15
Adding
Cel l Phone A
to device
list...
1
Cel l Phone A
is added
and connected
to base.
.