Download Print this page

Advertisement

Quick Links

WARNING: Read all
instructions before assembling this
product. KEEP INSTRUCTIONS
FOR FUTURE USE.
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact us first. You can also order parts by writing to the address above. Include the
product model number, color, and a brief description of the part.
Call 1-800-762-1751.
CARE AND CLEANING
DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning. Dust often using a clean, soft, dry cloth. Blot spills immediately and
wipe with a clean damp cloth. If the crib is to be stored, store in a cool dry place and carefully package all original hardware to protect from loss.
TOOLS AND INSTALLATION
Tools Necessary: Allen key (included)
Wrench (included)
Screwdriver (not included)
Note: It may be easier to assemble product with two people.
NOTE: When inserting bolts, turn clockwise until tight. Then loosen
Use wax or soap on all bolts to facilitate assembly.
B E N N E T B U N K B E D - F U L L O V E R F U L L I N S T R U C T I O N S
1
3
-
of a turn. After bunks is completely assembled, return to each bolt and tighten.
2
4
1 12
/

Advertisement

loading
Need help?

Need help?

Do you have a question about the Bennet Bunk Bed Full Over Full and is the answer not in the manual?

Questions and answers

Summary of Contents for RH Baby&child Bennet Bunk Bed Full Over Full

  • Page 1 B E N N E T B U N K B E D - F U L L O V E R F U L L I N S T R U C T I O N S WARNING: Read all instructions before assembling this product.
  • Page 2 IMPORTANT SAFETY INFORMATION FOR BUNK BED WARNING 1. Follow the information on the WARNINGS appearing on the upper bunk end structure and on the carton. TO HELP PREVENT SERIOUS OR FATAL 2. Always use the specified size mattress, mattress support, or both to help INJURIES FROM ENTRAPMENT OR FALLS: prevent the likelihood of entrapment or falls.
  • Page 3: Parts Included

    COMPONENT IDENTIFICATION AND HARDWARE PARTS INCLUDED [1] HEADBOARD [1] FOOTBOARD ITEM DESCRIPTION QTY. STORAGE RAIL [1] LOWER SIDE RAIL Threaded Rod 12 pcs. [2] UPPER SIDE RAILS Curved Washer 12 pcs. CANOPIES G1 [5] BED SLATS (LONG) Lock Washer 12 pcs. G2 [5] BED SLATS (SHORT) [2] LOWER PLATFORM PANELS 12 pcs.
  • Page 4 IMPORTANT These bed parts can be cumbersome and heavy, therefore the assistance of two or more people is recommended in order to prevent personal injury and ensure the bed parts are not damaged during the assembly process. ASSEMBLY INSTRUCTIONS 1. Lay the headboard (A) and footboard (B) on a flat surface. 2.
  • Page 5 Attach the storage rail to the headboard (A), as per illustration in FIGURE 4. DO NOT FULLY TIGHTEN. Attach the lower side rail (D) to the headboard as per illustration in FIGURE 5. DO NOT FULLY TIGHTEN. Bring the upper side rail (E) in upright position and align the threaded rods on the headboard to the corresponding holes in the end of the upper side rail.
  • Page 6 10. Align the threaded rods on the footboard (B) to the corresponding holes at the end of the storage rail (C), lower side rail (D), upper side rails (E) and Canopies (F). Align the locator pins on the end of the storage, the side rails and canopies to the corresponding holes in the footboard. Insert the footboard into the storage, the side rails and the canopies.
  • Page 7 13. Return the drawers to the storage by FOLLOW STEP BY STEP AT PAGE 11, 12. 14. For the purpose assembly, the both of Concealed metal bracket (10) were removed and put on hardware pack. At the footboard have the holes pre-drilled, this is location of the ladder that you will install.
  • Page 8 16. Set the bed slats (G1, G2) on the upper bunk and lower bunk. Secure each slat by using screws (13) provided. See FIGURE 11. 17. Place the platform panels (H, I) on the lower bunk and the upper bunk, then fix them with screws (13). See FIGURE 12. FIGURE 12 8 12...
  • Page 9 18. Align and attach the Curtain roll (K1/K2/K3) into the magnet installed on the Headboard, Footboard, Side rails and Canopies. See FIGURE 13. 19. INSTALL BEDDING BEDDING SPECIFICATION: The following size mattress and foundation are specified for use with this bunk bed. Mattress: 53''W x 75''L x 7''H on Full upper bunk and Full lower bunk.
  • Page 10 STEP #1: DRAWER REMOVAL INSTRUCTIONS Step #1.1: Pull the drawer out. See at bottom side of drawer. Unlock the plastic peg by pulling black plastic peg on runner out. See FIGURE A. Plastic FIGURE A Step #1.2: Hold the drawer with both your hands. Carefully lift the drawer front up from the front metal pin, then slide drawer forward to remove from back hooks. See FIGURE B.
  • Page 11 STEP #2: DRAWER ASSEMBLY INSTRUCTIONS Step #2.1: Pull the runner on the way out. Put the drawer onto them then hold both the runner with your hands. Lift the drawer up with your thumbs and push to hook the drawer at end of the runner. See FIGURE C. Metal hook FIGURE C Step #2.2:...
  • Page 12 STEP #3: DRAWER HIGH ADJUSTMENT INSTRUCTIONS Step #3: Adjust around gap of drawer by turn plastic button clockwise/counterclock wise direction. See FIGURE F. Plastic button FIGURE F 12 12...

This manual is also suitable for:

Bennet curtain