Welcome; Pre-Installation - BD Diesel Performance BD-Power X-MONITOR Installation Manual

Table of Contents

Advertisement

12 May 2005

Welcome

Thank you for purchasing the BD X-Monitor.
mentioned on the previous page for your installation. This manual is divided into
different areas to assist you with your installation and operation of your unit.

Pre-Installation

If you have existing gauges installed, you may have to determine where to
reposition them to accommodate the X-Monitor. The X-Monitor mounts on the
driver's side A-pillar panel, or, a custom dash-top universal kit can be purchased as
well.
This X-Monitor comes with all the programming to measure exhaust temperature
and boost pressure, plus, the option of adding one of the following: automatic
transmission temperature (using the OEM sensor), remote temperature sender (for
use with differentials for example), exhaust brake backpressure, and aftermarket
fuel tank levels.
Here are the standard list measurements:
The above two measurements can be displayed by themselves or you can add one
of these options along with them:
Description
Transmission Temperature
Remote Oil Temp
Exhaust Brake Back Pressure
Auxiliary Tank Level
The standard kit comes with all the components and wiring to hook up the exhaust
temperature, turbo boost pressure and automatic transmission temperature (using
the trucks OEM sensor); all other applications will require one of the accessories
above to install.
* The fuel tank level accessory kit interfaces with an aftermarket level sender with a
range of 240ohms (Empty) to 33ohms (Full). Sender not included.
Once the components have been installed, the X-Monitor will have to be
programmed to match the application and the measurements being monitored. This
will be done via the buttons on the display and will be explained further in this
manual. If you wish to change from one optional measurement to another, the X
U.S. Shipping Address: 88-446 Harrison St, Sumas, WA 98295
1086210 GMC/Chevy Duramax X-Monitor
Exhaust Gas Temperature
Turbo Boost Pressure
Plant Address: Unit A10, 33733 King Rd, Abbotsford, BC, Canada V2S 7M9
Phone: 604-853-6096 Fax: 604-853-8749 Internet: www.bd-power.com
Your kit should have the items
(PYRO)
(TURBO)
Value
(TRANS) INCLUDED
(OIL)
(B-PSI)
(FUEL)
BD Engine Brake Inc.
U.S. Mailing Address: P.O. Box 231, Sumas, WA 98295
BD P/N#
1080126
1080136
1080160 *
4

Advertisement

Table of Contents
loading

Table of Contents