Programming And Set Up - BD Diesel Performance BD-Power X-MONITOR Installation Manual

12 May 2005 1086210 GMC/Chevy Duramax X-Monitor 18

Programming and Set Up

Press both buttons in on the X-Monitor display
and turn on the ignition. You will get a screen
that the first line on the display will read "SIDE
OR TOP BTN?" and the bottom line reads
"SIDE". Let go of both buttons. Press the
bottom button to go to the next screen.
You will now get a screen that will read
"PART:" on the top line and "1080000" on the bottom line. Using the programming
chart located on the next page, find the program number that matches the
application and measurements you are going to program the X Monitor for. Press
the upper button until the program number appears, then press the bottom button to
activate that program. The display will now cycle through the normal start-up
screens that will appear every time the ignition is started.
It should display the following:
BD Engine Brake Inc.
Plant Address: Unit A10, 33733 King Rd, Abbotsford, BC, Canada V2S 7M9
U.S. Shipping Address: 88-446 Harrison St, Sumas, WA 98295 U.S. Mailing Address: P.O. Box 231, Sumas, WA 98295
Phone: 604-853-6096 Fax: 604-853-8749 Internet: www.bd-power.com