2003+ Duramax - BD Diesel Performance BD-Power X-MONITOR Installation Manual

12 May 2005

2003+ Duramax

terminal on the control box.
Secure the green wire in place away from any moving and/or hot parts and install
the skid plate that was removed in the first step. Tighten all fastening bolts. See
page 15 for the wiring diagram for reference.
U.S. Shipping Address: 88-446 Harrison St, Sumas, WA 98295
1086210 GMC/Chevy Duramax X-Monitor
Plant Address: Unit A10, 33733 King Rd, Abbotsford, BC, Canada V2S 7M9
Phone: 604-853-6096 Fax: 604-853-8749 Internet: www.bd-power.com
BD Engine Brake Inc.
U.S. Mailing Address: P.O. Box 231, Sumas, WA 98295
The engine oil pressure sensor
is located just in front of the
engine oil filter and housing.
This sensor has
attached.
Install a gray Posi-Tap onto the
tan w/white tracer wire of the
sensor harness then insert one
end of the green wire from the
oil pressure kit to the gray
Posi-Tap and then run the wire
up into the cab.
Attach the other end of the
green wire to the #4 'Sensor'
14
3 wires