Advertisement
Through Roof Fan Cowls and Fan Kits
WIRING CONNECTIONS
For axial EC inline fan models (no capacitor):
FAN0531 / FAN0532 / FAN0533 / FAN0534
FAN0739 / FAN1009 / FAN1060 / DCT0189
Brown
P
Blue
N
Green/Yellow
E
For centrifugal inline fan models:
FAN0529 / FAN0530 / FAN0535 / FAN0740
P
N
E
TYPICAL INSTALLATION
Fasten tube to roof truss or rafter using clamp bracket supplied.
Tube/cowl must be mounted vertically to ensure weatherproofing
Flexible ducting connects directly to the
bottom of rigid duct. Cut any excess
length of ducting off before connecting.
Installation Instructions
info@ventair.com.au | www.manrose.com.au
Motor
Red
Blue
Motor
Green/Yellow
White
2.0 F
CAP
Fix diffuser to ceiling and fasten ducting. If screw-fixing diffuser is
supplied cut 153mm diameter hole. If diffuser is type with spring
loaded self-latching clip fasteners cut 205mm diameter hole.
Specifications are subject to change without notice
For centrifugal (3 speed) inline fan models:
FAN0967
White (3)
SP3/P
White (2)
SP2/P
White (1)
SP1/P
White (4)
N
Green/Yellow
E
2.0 F
CAP
Connect SP3/SP2/SP1 to single phase (P)
for High/ Medium/ Low speed control
For centrifugal (3 speed) inline fan models:
FAN1002
Black
SP3/P
Brown
SP2/P
White
SP1/P
Blue
N
Green/Yellow
E
2.0 F
CAP
Connect SP3/SP2/SP1 to single phase (P)
for High/ Medium/ Low speed control
Make electrical connections below roof
Motor
White (5)
White (6)
Motor
Violet
Grey
Page 3
Distributed by Ventair Pty Ltd
Advertisement
