7 Maintenance, servicing, repairs, and disposal
7.1 Changing the batteries
1.
Place your thumb on the lid lock.
2.
Turn the lock counterclockwise and remove the lid.
3.
Remove the old batteries and insert two new batteries. Both batteries must always be
replaced at the same time.
4.
Replace the lid and turn the lock clockwise as far as it will go.
5.
Check that the battery light source is functioning properly and then switch it off.
7.2 Repairing the product
Repair work may only be performed by KARL STORZ or by a company authorized by
KARL STORZ. The interventions described in this instruction manual are exempt from this rule.
Instructions for use • LED battery light source with fast screw thread • KCC914_EN_V1.0_11-2020_IFU_CE-
MDR
Maintenance, servicing, repairs, and disposal
13