Table of Contents
Advertisement
2. PREPARE INSTALLATION
When performing installation, servicing or cleaning the unit, it is recommended to wear
safety glasses and gloves.
NOTE: Before proceeding to the installation, check the contents of the box. If items are missing or
damaged, contact the manufacturer.
Make sure that the following items are included:
- Hood
- Accessories
• Decorative flue assembly (lower and upper flues)
• 2 Hybrid filters
• 1 Ceiling mounting bracket (screwed on top of the hood)
• 8 Angle brackets
• 8" Round adapter/damper (in a separate box)
• Bag of parts (taped on the blower box) including: 2 wire connectors, 1 wire clamp,
8 no. 10 x 1½" wood screws, 8 steel washers, 10 no. 8 x 3/8" quadrex screws,
17 no. 10-32 flanged locknuts, 50 x 10-32 x 1/2 quadrex hex head screws,
2 no. 8-1/2 low profile Philips screws.
Parts sold separately:
- Ducts, elbows, wall and roof caps.
- Optional flue extension for 10-ft. ceilings model no. 19324.
- Optionnal remote control (model no. 21233).
- Glass panels for IS70036WG model (see replacement parts
NOTE: During installation, protect countertop and/or cooktop.
3. MEASURE INSTALLATION
Determine
the
between the ceiling and the top of
the blower box (C) based upon ceiling
height (B) and desired height of hood
above cooktop (A).
NOTE: C = B - A - 12 3/16"
required
distance
WARNING
!
B
LOWER
BOX TOP
12
⁄
"
3
16
R
ANGE
HOOD
BOTTOM
12
C = B - A -
HH0157A
5
list).
C
⁄
"
3
16
A
C
EILING
B
C
OOKTOP
Advertisement
Table of Contents
