G8Sxi And G12Sxi Modules; G8Sxi Module And G12Sxi Module - Extreme Networks BlackDiamond 6800 Hardware Installation Manual

B D 6800 S O
LACK IAMOND WITCH
G8SX G12SX M
I AND I
The G8SXi and G12SXi modules are shown in
51030
Module status LEDs
STATUS DIAG
1
AMBER
=
ACTIVITY Port status LEDs
GREEN
=
LINK OK
FLASHING
GREEN
=
DISABLED
2
1000 Mbps
3
ports with
status LEDs
4
5
1000 Mbps
ports
6
7
8
Figure 1-5: G8SXi module and G12SXi module
The G8SXi module has eight standard MT-RJ connectors. The G12SXi module has
twelve standard MT-RJ connectors. Both modules support 1000BASE-SX. The default
configuration of the G8SXi and G12SXi modules is as follows:
• All ports are added to the default VLAN as untagged.
• All ports inherit the properties of the default VLAN (for example, protocol type,
VLANid, and so on).
• All ports are in auto-negotiation mode.
For supported media types and distances, refer to
1-14
VERVIEW
ODULES
51040
1 5 9
2 6 10
3 7 11
4 8 12
AMBER = ACTIVITY
GREEN = LINK OK
FLASHING GREEN = DISABLED
1
2
3
4
5
6
7
8
9
10
11
12
EW_G8n12
Figure 1-5.
Table 1-1.
BlackDiamond Switch Hardware Installation Guide