Adding A Sodimm - Extreme Networks BlackDiamond 6800 Hardware Installation Manual

S M
ERVICE AND AINTENANCE
Figure 3-3: Adding a SODIMM
To remove a SODIMM, follow these steps:
1 Prior to removing or installing SODIMMs on the MSM64i, put on the ESD wrist
strap that is provided with the chassis, and connect the metal end to the ground
receptacle located on the top-left corner of the BlackDiamond 6800 switch front
panel.
2 Disengage the SODIMM by pulling out on the ejector locks located on either side of
the SODIMM.
3 Rotate the SODIMM out of the socket.
3-6
EW_SODMs
B D S H
LACK IAMOND WITCH ARDWARE
I G
NSTALLATION UIDE