Table of Contents
Advertisement
Auto-Standby / Auto-Wake Feature
[Auto-Standby] Your soundbar has been
•
programmed to enter Standby mode
automatically when no audio is detected for
15 minutes. For example, this would happen
when pausing playback, or should the
soundbar be left on accidentally.
[Auto-Wake] If a TV or an external device is
•
connected (COAXIAL/OPTICAL socket), the unit
will switch on automatically when the TV or
the external device is switched on.
To disable this feature, please follow the steps
below:
1. During ON mode, pointing the remote at the
soundbar, press and hold the
seconds to open the menu.
-
The unit's display will scroll "MENU".
2. Press the
button 6 times in succession ：
the display shows: Auto Wake [ON / OFF].
OR
Press the
button 7 times in succession, the
display shows: Auto Standby [ON / OFF].
3. Select the content with VOL +/- buttons on the
remote controller, and then press
your selection and exit the settings.
•
Repeating these steps will toggle the feature
ON and OFF.
Select Modes
Press the
(SOURCE) button on the unit or on
the remote control to select the ARC, HDMI IN,
OPTICAL, COAXIAL, Bluetooth and USB mode.
The selected mode will show on the display.
Mode
ARC
HDMI IN
OPTICAL
COAXIAL
Bluetooth
USB
Note
Play-Fi is not an optional source. Play-Fi needs
to be directly controlled by app.
button for 3
to confirm
Display
/
hDMI
Connected:
Connection:
Adjust the Bass/Treble Level
•
Press the TREBLE +/- buttons to increase or
decrease the treble.
(treble+5 / treble–5)
•
Press the BASS +/- buttons to increase or
decrease the bass.
(bass+5 / bass–5)
Turn the Surround Sound ON/OFF
•
Press the SURR button on the remote control
to turn on the surround sound. Press this
button again to turn off the surround sound.
Adjust the Volume
•
Press the VOL+ / VOL- buttons on the unit or
on the remote control to adjust the volume.
•
If you wish to turn the sound off, press the
(MUTE) button on the remote control. Press
the
(MUTE) button again or press the VOL+
/ VOL- buttons to resume normal listening.
Adjust the Brightness
•
Press the DIMMER +/- buttons on the remote
control to select brightness level.
Select a Preset Sound Effect
•
While playing, press the EQ button on the
remote control to select desired preset
equalizers:
MUSIC, MOVIE, NEWS, SPORT, NIGHT, GAME,
AI EQ
Set the Audio Delay
Video image processing, sometimes longer than
the time required to process the audio signal. This
is called "delayed. " Audio Delay feature is designed
to remedy this delay. By default, the audio delay is
set to 0.
•
Set the audio delay, provided only for the
current playback mode. (As provided in the
HDMI ARC audio delay mode, the delay mode
is valid only for the HDMI ARC).
-
By default, the audio delay is set to 00.
1. During ON mode, press and hold the
button for 3 seconds to open the menu, then
press the
button 9 times in succession. the
unit's display will scroll " LT 00".
2. Press the VOL+/- buttons will be a 10 ms
frequency hopping to adjust the delay time.
Set 200 ms maximum delay.
15
Advertisement
Table of Contents
