Connect To Wi-Fi (Wireless Operation) - Hisense HS216FW User Manual

Connect to Wi-Fi (wireless
operation)
(For iOS and Android version)
By connecting this unit and mobile phones,
tablets (such as iPad, iPhone, iPod touch, Android
phones, etc.) to the same Wi-Fi network, you can
then use the xxx Audio app
Fi to control the unit to listen to audio files.
1. Connect your phone or tablet to the same Wi-
Fi network that you want to connect your unit.
2. Download and install the
powered by DTS Play-Fi on a phone or tablet.
Play-Fi
• Make sure your router is turned on and
working properly.
3 Press and hold PF (Wi-Fi Setup) button located
at the back cabinet for 8 sec to trigger the Wi-
Fi connection.
• Until the speaker make a second tone and then
release the button.
4 Wait until the Wi-Fi light indicator on the back
cabinet goes from a fast blink to a slow pulse.
When it begins pulsing slowly, it indicates that
the speaker is entering the Wi-Fi setup mode.
5 Launch the xxx Audio app
Play-Fi. Follow the instructions in the App to
connect this product to your Wi-Fi network.
NOTE:
For iOS version only : Wi-Fi network used by
iPhone should be switched temporarily to Play-Fi
device AP and restart
the product's Wi-Fi setup.
6 After successful Wi-Fi connection, the Wi-
Fi light indicator will stop pulsing and turn
solid. Once you set up this product on your
Wi-Fi network, you can control it from any
smartphone or tablet on the same network.
• When using the app to play music, the display
panel will show PLAY-FI.
7 After connection, you can change the device
name. There are several names to choose
from or create your own by choosing Custom
powered by DTS Play-
xxx Audio app
powered by DTS
xxx Audio app to complete
Name at the end of the name list. Otherwise, it
follows the default name.
8 After connection, this product may perform
a software update. Upgrade to the latest
software when it is your first time set up. The
software upgrade may take several minutes.
Do not unplug your speaker, turn off your
device, or leave the network during the update.
Note
After connection, the product may perform
•
a software update. Upgrade is required after
initial setup. Without the upgrade, not all
product features can be available.
When the first time setup is not successful,
•
hold down the Wi-Fi button on Soundbar
for 8 seconds until you hear the second tone
and the Wi-Fi light changes to slow pulse.
Reset the Wi-Fi connection, restart the app
and start the setup again.
If you want to change from one network to
•
another, you need to setup the connection
again. Press hold down the PF (Wi-Fi Setup)
button on the Soundbar for 8 seconds to
reset the Wi-Fi connection.
AirPlay setup
Use AirPlay to set up the Wi-Fi connection of iOS
device (iOS7 or later) and Soundbar.
1 Press and hold PF (Wi-Fi Setup) button located
at the back cabinet for 8 sec to trigger the Wi-
Fi connection.
2 iOS device: Settings > Wi-Fi > select home
network [Play-Fi device (xxxxxx)]
iOS Wi-Fi set up by AIRPLAY
Settings
Wi-Fi
Networks
SET UP NEW AIRPLAY SPEAKER...
Play-Fi DeviceXXXXXXXX
13
Wi-Fi