Basic Operation; Standby/On - Hisense HS216FW User Manual

3 Launch the xxx Audio app
Play-Fi. Follow the instructions in the app to
connect this product to your Wi-Fi network.
• After successful Wi-Fi connection, the Wi-Fi
light indicator will stop pulsing and turn
solid. Once you set up this product on your
Wi-Fi network, you can control it from any
smartphone or tablet on the same network.
• When using the app to play music, the display
panel will show PLAY-FI.
4 After connection, you can change the device
name. There are several names to choose
from or create your own by choosing Custom
Name at the end of the name list. Otherwise, it
follows the default name.
5 After connection, this product may perform
a software update. Upgrade to the latest
software when it is your first time setup. The
software upgrade may take several minutes.
Do not unplug your speaker, turn off your
device, or leave the network during the
update.
Note
After connection, the product may perform
•
a software update. Upgrade is required after
initial setup. Without the upgrade, not all
product features can be available.
When the first time setup is not successful,
•
hold down the Wi-Fi button on Soundbar
for 8 seconds until you hear the second tone
and the Wi-Fi light changes to slow pulse.
Reset the Wi-Fi connection, restart the app
and start the setup again.
If you want to change from one network to
•
another, you need to setup the connection
again. Press hold down the PF (Wi-Fi Setup)
button on the Soundbar for 8 seconds to
reset the Wi-Fi connection.
WPS mode
If your router has Wi-Fi Protected Setup (WPS),
you can set up the connection without entering a
password.
1. Press and hold the PF (Wi-Fi Setup) button for
4 seconds. You will hear a tone and the Wi-Fi
light will begin double blink.
2. Press the WPS button on your router. The
button is normally marked with this WPS logo.
powered by DTS
WPS
3. Follow the instruction in
powered by DTS Play-Fi to start the pairing.
Note
WPS is not a standard feature on all routers.
•
If your router does not have WPS then use
Standard Wi-Fi Setup.
Press the PF (Wi-Fi Setup) button once if
•
you want to exit the WPS mode or it will
automatically exit after 2 minutes.

Basic Operation

Standby/ON

When you first connect the main unit to the mains
socket, the main unit will be in Standby mode.
• Press the button on the unit or on the
remote control to switch the unit ON.
• Press the button again to switch the unit
back to STANDBY mode.
Power
Action
State
On
Semi
Press
Standby
once
Long
Eco
press
Standby
5 seconds
• Disconnect the mains plug from the mains
socket if you want to switch the unit OFF
completely.
14
xxx Audio app
Function
• Follow source state
• Wi-Fi is still on.
• It still supports Play-Fi
and Airplay2.
• Wi-Fi is off.
• The product enters
the lower power
consumption mode.
• Restarting the system
will take a relatively
longer time.